It is possible to migrate the whole array to larger drives (e.g. 250 GB to 1 TB) by replacing one by one. In the end the number of devices will be the same, the data will remain intact, and you will have more space available to you. Extending an existing RAID array In order to increase the usable size of the array, you must increase ...
So finally took the time to try out a Raspberry Pi. For this weekend project wanted to do something relatively simple. Essentially, I wanted to recreate/enhance the functionality of a TL-WR702N. The TL-WR702N Nano Router is a neat device but being closed, can not be customized to what I wanted. It can be used in the following modes: ...
This tutorial describes how to use the alarm manager to set alarms and how to use the notification framework to display them. In short, the sequence goes like this: In an Activity AlarmManager.set is called with a PendingIntent containing a Uri. When the alarm goes off, the Uri is called triggering a BroadcastReceiver. In the BroadcastReceiver NotificationManager.notify is called with a PendingIntent. When the notification is clicked, the Activity in the PendingIntent is started. ...
This is an interesting concept. Essentially is an Encryption dongle that encrypts stuff between your PC and your USB mass storage device. Addonics Product: CipherUSB. ...
I am still to test this recipe Server Configuration First of all, we must install the following components: A DHCP server to assign IP addresses to our diskless nodes. A TFTP server to transfer the boot image (a requirement of all PXE option roms). ...
Sometimes we need to connect two or more geographically distributed ethernet networks to one broadcast domain. There can be two different office networks of some company which uses smb protocol partially based on broadcast network messages. Another example of such situation is computer cafes: a couple of computer cafes can provide to users more convinient environment forr playing multiplayer computer games without dedicated servers. Both sample networks in this article need to have one *nix server for bridging. Our networks can be connected by any possible hardware that provides IP connection between them. Connecting Two Remote Local Networks With Transparent Bridging Technique Short description In described configuration we are connecting two remote LANs to make them appearing as one network with 192.168.1.0/24 address space (however physically, presense of bridges in network configuration is not affecting IP protocol and is fully transparent for it, so you can freely select any address space). Both of the bridging servers has two network interfaces: one (as eth0 in our example) connested to the LAN, and second (eth1) is being used as transport to connect networks. When ethernet tunnel between gateways in both networks will be bringed up we will connect tunnel interfaces with appropriate LAN interfaces with bridge interfaces. Schematically this configuration can be following: ...