⨯ 🔍

Enable local file caching for NFS share on Linux

by Alejandro Liu

Updated: 2024-11-15

in 2013

tagged centos, configuration, filesystem, information, installation, linux, network, partition, remote, service, storage, sudo, ubuntu

In Linux, there is a caching filesystem called FS-Cache which enables file caching for network file systems such as NFS. FS-Cache is built into the Linux kernel 2.6.30 and higher. In order for FS-Cache to operate, it needs cache back-end which provides actual storage for caching. One such cache back-end is cachefiles. Therefore, once you set up cachefiles, it will automatically enable file caching for NFS shares.

Requirements

One requirement for setting up cachefiles is that local filesystem support user-defined extended file attributes (i.e., xattr), because cachefiles use xattr to store extra information for cache maintenance. If your local filesystem is ext4-type, you don't need to worry about this since xattr is enabled in ext4 by default. However, if you are using ext3 filesystem, then you need to mount the local filesystem with "user_xattr" option. To do so, edit /etc/mtab to add "user_xattr" mount option to the disk partition that will be used by cachefiles for file caching. For example, assuming that /dev/hda1 is such a partition:

/dev/hda1 / ext3 rw,user_xattr  0 0

After modifying /etc/fstab, reload it by running:

$ sudo mount -o remount /

Configure CacheFiles

In order to set up cache back-end using cachefiles, you need to install cachefilesd, a userspace daemon for managing cachefiles. To install cachefilesd on Ubuntu or Debian:

$ sudo apt-get install cachefilesd

To install cachefilesd on CentOS, Fedora or RedHat:

$ sudo yum install cachefilesd
$ sudo chkconfig cachefilesd on

After installation, enable cachefilesd by editing its configuration file as follows.

$ sudo vi /etc/default/cachefilesd

RUN=yes

Next, mount a remote NFS share with fsc option:

 $ sudo vi /etc/fstab

 192.168.1.13:/home/xmodulo /mnt nfs rw,hard,intr,fsc

Alternatively, if you mount the remote NFS share from the command line, specify fsc as a command-line option:

$ sudo mount -t nfs 192.168.1.13:/home/xmodulo /mnt -o fsc

Finally, restart cachefilesd:

$ sudo service cachefilesd restart

At this point, file caching should be enabled for the mounted NFS share, which means that previously accessed files in the mounted NFS share will be retrieved from local file cache. If you want to flush NFS file cache for any reason, simply restart cachefilesd.

 $ sudo service cachefilesd restart

Source: xmodule.com